? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 1068, rev. preliminary hermetic power s chottky rectifier 200 c maximum operation temperature add suffix "s" to part number for s-100 screening. description: a 100 volt, 3 amp, power schottky re ctifier in a ceramic hermetic lcc-5 package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 100 volts maximum dc output current (w ith cathode ma intained @ t c =100 o c) (single) (common cathode) i o 3.0 6.0 amps maximum nonrepetitive forward surge current (t=8.3ms, sine) (per leg) i fsm 55 amps maximum junction capacitance (v r =5v) c t 100 pf maximum thermal resistance (per leg) r jc 5.95 c/w maximum operating temperature range top -65 to + 200 c maximum storage temperature range tstg -65 to + 175 c electrical characteristics characteristic symbol max. units maximum forward voltage drop, pulsed (i f = 3.0 amps) (per leg) t j = 25 c t j = 125 c v f 0.89 0.73 volts maximum reverse current (i r @ 100v piv) (per leg) t j = 25 c t j = 125 c i r 0.07 1.6 ma shd120044 SHD120044P
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron data sheet 1068, rev. preliminary mechanical dimensions: in inches / mm common cathode 2 1 3 pinout table device type pin 1 pin 2 pin 3 dual rectifier, single cathode anode 1 anode 1 dual rectifier, common cathode (p) cathode anode anode v f curves are for bare die only. shd120044 SHD120044P lcc-5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 forward voltage drop - v f (v) 10 -3 10 -2 10 -1 10 0 instantaneous forward current - i f (a) typical forward characteristics 125 c 200 c 175 c 25 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 200c 175 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 10 20 30 40 50 60 70 80 90 junction capacitance - c t (pf) typical junction capacitance
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron data sheet 1068, rev. preliminary shd120044 SHD120044P disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
